|
The 896 gives you the ability to select a mono or stereo input via software and mix it with the main outputs inside the 896 to create a no latency monitor mix. Because the mix does not have to travel back to the computer, the result is delay-less patch-thru. This mix is sent out the main outs and headphones. You can adjust the patch thru volume relative to the main mix with the convenient front panel monitor level knob.
Features
- Drivers for Mac & PC - for all popular Macintosh and Windows audio software (ASIO/WDM/Wave/Sound Manager drivers).
- Expandable with additional MOTU Firewire based interfaces such as the MOTU 828.
- 100% compatible with all host-based effects processing in today's popular audio programs.
- 44.1, 48, 88.2 and 96kHz sample rates supported.
- CueMix Plus™ zero-latency hardware patchthru system.
- Includes AudioDesk full-featured sample-accurate workstation software for MacOS with recording, editing, mixing, real-time 32-bit effects processing & sample-accurate sync.
- 8 channels of 24-bit ADAT optical input/output.
- Sample-accurate digital transfers between ADAT digital tape decks and the computer via the ADAT sync port.
- Stereo AES/EBU input and output with built in sample rate conversion.
- Word clock I/O for easy integration into a studio with many devices with digital I/O. Can slave to word clock at half-speed or double speed. Can send word clock at half speed when running at 88.2 or 96 kHz.
- Eight 24-bit analog inputs using balanced/unbalanced 1/4"/XLR Neutrik combo connectors.
- Eight mic pre-amps with switchable 48-volt phantom power on the front panel.
- Eight 24-bit analog outputs using balanced XLR connectors. Each output is individually switchable to +4 or -10.
- 109dB dynamic range
- Front panel volume control of monitor input level on main outs.
- Front panel headphone jack with independent volume control.
- Extensive multi-segment front panel metering for all I/O and clock modes. Software-configurable peak and clip hold times.
- Trim controls for all inputs on front panel.
- Front panel footswitch/punch jack.
-
|